40N, covered linear actuator
The LTC40 version is similar to the LT40 but is covered and has a stroke of maximum 12.8mm
Compact and strong. High resolution and smooth motion.
- True linear direct drive
- Resolution down to sub-nanometer
- Covered
- 40 N force
- 0-12.8 mm stroke
- Self-locking
- No backlash
True direct linear drive
The drive technology is direct, meaning no gears or lead screws are needed to create linear motion. The motor moves by microstepping, dividing a full waveform-step into nanometer size increments. Speed ranges from nanometers per second to millimeters per second, and can be seamlessly controlled in the whole dynamic range with no need to alter the driving mode.
The twin concept makes for high force output in a covered body, in this case a stall force of 40N. This gives a more robust design without the need of ball bearings.
It has direct drive with no backlash and can microstep in the sub-nano millimeter range. Does not come with built-in encoder.
Full force greater then 40 Newton power-off locking safety function inherent to the design.
Specifications LEGS® LTC40
|
Type
|
Standard (A)
|
Unit
|
|
Stroke
For more information se table below |
0–13
|
mm
|
|
Speed Range |
0-12
|
mm/s
|
|
Step length, full step
@ Delta, no load, 20°C |
5
|
μm
|
|
Resolution
14 bits, 8192 microsteps |
<1
|
nm
|
|
Built in encoder
|
No
|
|
|
Stall force
|
40
|
N
|
|
Holding force
|
>40
|
N
|
|
Vacuum
|
NA
|
torr
|
|
Recommended operating range
|
0-20
|
N
|
|
Operating voltage
|
42-48
|
V
|
|
Power consumption
|
20
|
mW/Hz
|
|
Mechanical size L x H x D
|
65 x 29 x 29
|
mm
|
|
Weight
|
175
|
g
|
|
Connector motor
|
Connector Cable w. JST 05SR-3S or JST-SHR-05V-S
|
|
|
Material in motor housing
|
Stainless steel
|
|
|
Operating temperature
|
-20 to +70
|
ºC
|
Main dimensions LTC40
Motor performance LTC40
Motor performance with waveform Rhomb (filled) and waveform Delta (dotted). The full step length is the average distance the drive rod moves when the legs take one full step (i.e. for one waveform cycle).
Note: A standard deviation σ of 0.5 μm should be taken into account.
Typical values are given for 20ºC.
Stroke range
|
Stroke (mm) with one adapter
|
Drive rod length (mm)
|
|
0-13 |
Fixed
|
Motor speed at 20 ºC no load
|
Waveform
|
Max feq. (Hz)
|
Speed range (mm/s)
|
|
Delta
|
1500
|
0-8
|
|
Rhomb |
1500
|
0-12
|
Controlling the motor
Our motor control units come in many different versions, with controllers and amplifiers for laboratory use as well as for integration into OEM devices.
We can also license the drivers for customers that want to build their own driver electronics.
LTC40 LEGS® Piezo Motor Starter Kit
Starter kits are available for the LT40 in different configurations. Starter Kits are for evaluation purposes only with a max quantity of 3 kits/customer. You only pay for the motor.
